Products
-
Overrunning AlternatorPulley F-564313
Whether the generator pulley is a one-way pulley has a great impact. Belt vibration will reduce the service life of relevant accessories on the belt, air conditioning pump, tensioning pulley, etc.
-
over running alternator pulley 27415-0T010
Parameter Original number Generator number Generator number Applicable models SKEW 6 TOYOTA TOYOTA DENSO Toyota Carola OD1 61 27415-0T010 27060-0V010 104210-2270 Corolla1.6/1.8/2.0 OD2 55 27415-0T011 27060-36010 104210-2340 Vios Yashili OAL 43.5 27415-0T060 27060-37050 104210-5280 TOYOTA RAV-4 2.4L IVH 17 27415-0W020 27060-37051 104210-5490 Ford Mustang Rotary Right 27415-0M011 LITENS 121000-3850 4.6L 10/11 M M14 27060-0T030 920685 121000-4520 27060-0T031 920834 4... -
alternator clutch pulley F-585322
Check the generator one-way wheel: 1. Measure the generator voltage with a multimeter. The normal value is between 12.5V and 14.8V. If the voltage is abnormal, the generator is damaged;
-
Generator CLUTCH PULLEY F-567525
If the two-way damping pulley provided by the other party does not have an overrunning clutch, it may basically be made of rubber bonded with the outer ring iron ring, and the inner and outer rings are filled with special rubber. The damping mechanism of the rubber is similar to the damping spring, which can reduce the resonance amplitude during the operation of the pulley and slow down the impact during speed change.
-
Overrunning AlternatorPulley F-556174
The one-way belt pulley of the generator has the ability of one-way transmission, and it will not produce transmission power if it bounces and reverses at the moment of starting;There is no current generated in case of its reverse rotation difference, so it can effectively avoid damaging the vehicle motor; And it is also obvious in reducing the reaction force on the engine, which can make the engine run smoothly.
-
Generator pulley lternator F-550213
The automobile manufacturer has developed an surpassing alternator pulley. Unlike the traditional alternator pulley, it allows the alternator to “surpass” when the engine slows down, so as to absorb the vibration in the engine. Alternator and other belt drive components.
-
removing alternator pulley F-225643.06
At present, OAP produced by ina in Germany or NTN, NSK and Koyo in Japan has similar advantages over one-way pulley, which is also the performance of two-way (shock absorption) pulley.
-
alternator clutch pulley F-236071.03
OAP one-way belt pulley is composed of a wheel pan, roller clutch and belt hub (see the figure below). The outer contour of the wheel pan is designed to be suitable for matching with multi wedge belt. There are a row of needle rollers on both sides of the roller clutch to support radial load
-
Generator CLUTCH PULLEY F-231618
If the two-way damping pulley provided by the other party does not have an overrunning clutch, it may basically be made of rubber bonded with the outer ring iron ring, and the inner and outer rings are filled with special rubber. The damping mechanism of the rubber is similar to the damping spring, which can reduce the resonance amplitude during the operation of the pulley and slow down the impact during speed change. Try to achieve shock absorption. As far as we know, the actual damping effect of this belt pulley is not obvious, because it does not have the function of surpassing the clutch, the impact of slowing down the speed change is limited, and for the generator with high moment of inertia, it can not continue to rotate inertia and stop slowly, and can not actually and effectively protect the generator.
-
over running alternator pulley F-228824
The one-way belt pulley of the generator is composed of an outer ring matching the cross-sectional shape of the multi-wedge belt, a clutch unit composed of a stamped inner ring, an outer ring and a double needle roller bearing, a shaft sleeve and two sealing rings. In order to prevent the influence of water and other dirt, a protective cover is installed on its outer end face.
-
Generator CLUTCH PULLEY F-600396
Generally, the generator is installed with fixed bearings. When the car is running, it accelerates and decelerates, so that the belt is constantly tightened and relaxed. The working principle of the one-way pulley is similar to that of the one-way clutch gear on the starter, which has the function of one-way slip. The generator pulley can only rotate in the same direction to drive the rotor to rotate. On the contrary, the pulley will only idle!
